AEG 18V to MacNaught 18V Battery Adapter (Pump, Grease Gun)
$33.99
Skip to product information
AEG 18V to MacNaught 18V Battery Adapter (Pump, Grease Gun)
$33.99
Taxes included.
Free Shipping to Canada, USA and Australia! No minimum.
Safety feature
Built-in BMS Protection
Integrated Battery Management System (BMS) helps prevent battery over-discharge and improves safety.
Use your AEG 18V batteries on MacNaught 18V cordless tools, without buying into a second battery platform. Both run at 18V, so the adapter changes the fitting and not the voltage. The battery side is injection-molded ABS and the tool interface is high-precision 3D-printed ABS for an accurate fit, with pure copper contacts carrying the current. It is a cost-effective way to get more from the batteries you have, with no second charger to maintain. It also carries battery protection electronics (BMS) inside.
Specifications
- SKU
- PTA-AEG18-MNA18
- Fits this battery
- AEG 18V (Lithium-Ion)
- Battery voltage
- 18V
- Runs these tools
- MacNaught 18V (Lithium-Ion)
- Tool voltage
- 18V
- Housing
- ABS
- Terminals
- Copper
- Current rating
- 40A continuous (80A peak at 18VDC for up to 2 seconds)720 Watt continuous at 18V nominal
- Internal wiring
- 5 mm²
- Weight
- 118 g (4.2 oz / 0.26 lb)
- Colour
- Orange, Black
- Operating humidity
- 5–95% RH
- Operating temperature
- -10 °C to 50 °C (14 °F to 122 °F)
- USB port
- No
- Built-in BMS protection
- Yes
- What's in the box
- Battery Adapter
- Warranty
- 12 months after the date of deliveryMore details
- Revision
- Revision 01 (released on February 15, 2026)
Why choose this adapter
- Your AEG 18V battery and MacNaught 18V tools run at the same voltage, so the adapter changes the fitting rather than converting anything.
- A Battery Management System inside the adapter cuts power before the battery is drained too far — protection your battery may not have on its own.
- Solid copper terminals, so less of the current is lost as heat.
- 5 mm² internal wiring, rated for 40A continuous with 80A peak at 18VDC for up to 2 seconds, so a high-draw tool is not held back by the adapter.
- Covered by a 12-month warranty from the day it arrives.
AEG 18V and MacNaught 18V compatibility
It works in one direction only: AEG batteries powering MacNaught tools. For the opposite pairing, see adapters that run on MacNaught 18V batteries.
Compatibility can vary with the exact battery and tool model. Before ordering, confirm that your battery belongs to the AEG 18V platform and that your tool takes MacNaught 18V batteries.
Important charging and safety information
This adapter is for powering cordless tools and nothing else. It cannot charge AEG or MacNaught batteries and must never be connected to a charger of any kind. Always take the battery out of the adapter before charging, and charge it on the original charger made for your AEG 18V battery.
How it works
-
1. Use the battery you own
Any compatible AEG 18V battery you already have.
-
2. Slide on the adapter
It goes where the original MacNaught 18V battery sits.
-
3. Click in and work
No tools, no wiring, no modifications.
AEG 18V to MacNaught 18V — Common Questions
Will my MacNaught 18V tool run as long on a AEG 18V battery?
Runtime comes from the battery, not the adapter — a 5.0Ah AEG 18V battery lasts roughly twice as long as a 2.5Ah one, exactly as it would on its own tool. The adapter’s copper terminals and heavy-gauge wiring are there to keep resistive loss low.
Could this damage my AEG 18V battery or my MacNaught 18V tool?
Used with undamaged, compatible equipment it is not expected to. This adapter has its own Battery Management System, which cuts power before the battery is drained too far, so it protects the battery even where the battery has no protection of its own. Stop using it if the adapter becomes unusually hot, the contacts look damaged, or the tool behaves oddly.
Can I charge through the adapter?
No, and it should never be attempted. The adapter carries power one way only, out to the MacNaught 18V tool — there is no charging circuit inside it. Connecting it to a charger puts the battery, the charger and the adapter at risk. Always take the AEG 18V battery off the adapter and charge it on its own charger.
Does it work with third-party AEG batteries?
Usually. What matters is the socket, not the badge: if the battery slides on and locks the way an original does, the adapter takes it and the MacNaught 18V tool runs. Aftermarket moulding does vary, so if yours looks unusual send us a photo and we will check before you order.
How much does it add to the MacNaught 18V tool?
118 g (4.2 oz) and a short extension between battery and tool. You notice it overhead or in a tight cabinet; on a drill or driver held normally it disappears.