Ozito PXC 18V to Dyson V10 Battery Adapter
$47.99
Skip to product information
Ozito PXC 18V to Dyson V10 Battery Adapter
$47.99
Taxes included.
Free Shipping to Canada, USA and Australia! No minimum.
Safety feature
Built-in BMS Protection
Integrated Battery Management System (BMS) helps prevent battery over-discharge and improves safety.
Fits these Dyson V10 models
- SV12
- SV12G
- SV27
- SV58
Not compatible:
- 285O
- 285P
- SV18
- SV55-A
- SV55-AE
- V10 Konical
Use your Ozito 18V PXC batteries on your Dyson V10, with no new Dyson battery to buy. Built with a durable injection-molded ABS housing and pure copper contacts for steady current delivery. A practical way to get more from the Ozito 18V PXC batteries you already have. It also carries battery protection electronics (BMS) inside.
Specifications
- SKU
- PTA-OZI18-DYSV10
- Fits this battery
- Ozito 18V PXC (Lithium-Ion)from Bunnings
- Runs this vacuum
- Dyson V10 (Lithium-Ion)
- Housing
- ABS (Injected)
- Terminals
- Copper
- Current rating
- 60A continuous (100A peak at 18VDC for up to 2 seconds)1512 Watt continuous at 25.2V nominal
- Weight
- 194 g (6.8 oz / 0.43 lb)
- Colour
- Grey
- Operating humidity
- 5–95% RH
- Operating temperature
- -10 °C to 50 °C (14 °F to 122 °F)
- USB port
- No
- Built-in BMS protection
- Yes
- What's in the box
- Battery Adapter
- Warranty
- 12 months after the date of deliveryMore details
- Revision
- Revision 01 (released on August 20, 2026)
Why choose this adapter
- A Battery Management System inside the adapter cuts power before the battery is drained too far: protection your battery may not have on its own.
- Injection-moulded ABS, not 3D printed, so there are no layer lines to split under load.
- Solid copper terminals, so less of the current is lost as heat.
- Rated for 60A continuous with 100A peak at 18VDC for up to 2 seconds, so the vacuum’s highest power mode is not held back by the adapter.
- Made for the Ozito 18V PXC batteries sold at Bunnings, so the fit is the one you already own.
- Covered by a 12-month warranty from the day it arrives.
Ozito 18V PXC and Dyson V10 compatibility
It works in one direction only: Ozito batteries powering your Dyson.
Compatibility can vary with the exact battery and vacuum model. Before ordering, confirm that your battery belongs to the Ozito 18V PXC platform and that your vacuum is a Dyson V10: the model number on its label tells you.
Important charging and safety information
This adapter is for powering your vacuum and nothing else. It cannot charge Ozito or Dyson batteries and must never be connected to a charger or the vacuum’s dock. Always take the battery out of the adapter before charging, and charge it on the original charger made for your Ozito 18V PXC battery.
How it works
-
1. Use the battery you own
Any compatible Ozito 18V PXC battery of 4Ah or more.
-
2. Slide on the adapter
It goes where the original Dyson V10 battery sits.
-
3. Click in and work
No tools, no wiring, no modifications.
Ozito 18V PXC to Dyson V10: Common Questions
Which Dyson V10 models does this adapter fit?
It fits the Dyson V10 range: SV12, SV12G, SV27, SV58. It does not fit the 285O, 285P, SV18, SV55-A, SV55-AE, V10 Konical.
Will my Dyson V10 run as long on your Ozito 18V PXC battery?
Runtime comes from the battery, not the adapter: a 5.0Ah Ozito 18V PXC battery lasts roughly twice as long as a 2.5Ah one. For this pairing use 4.0 Ah or more, because a smaller battery can sag under what a Dyson V10 draws and cut out before it is empty.
Could this damage my Ozito 18V PXC battery or my Dyson V10?
Used with undamaged, compatible equipment it is not expected to. This adapter has its own Battery Management System, which cuts power before the battery is drained too far, so it protects the battery even where the battery has no protection of its own. Stop using it if the adapter becomes unusually hot, the contacts look damaged, or the vacuum behaves oddly.
Can I charge through the adapter?
No, and it should never be attempted. The adapter carries power one way only, out to the Dyson V10: there is no charging circuit inside it, and the vacuum’s dock cannot charge through it. Always take the Ozito 18V PXC battery off the adapter and charge it on its own charger.
My Ozito 18V PXC gear came from Bunnings. Is that the same platform?
Yes — Bunnings is where Ozito 18V PXC is sold, so a battery or tool bought there is the platform this adapter is built for. What matters is the socket, and Bunnings stock is the reference for it.
Does it work with third-party Ozito batteries?
Usually. What matters is the socket, not the badge: if the battery slides on and locks the way an original does, the adapter takes it and the Dyson V10 runs. Aftermarket moulding does vary, so if yours looks unusual send us a photo and we will check before you order.
How much does it add to the Dyson V10?
194 g (6.8 oz), plus your battery, which sits under the handle where the original battery was. You notice the extra weight on stairs or when reaching up high; on floors it soon feels normal.